Specifications

Shenzhen unique vaporizer herb vaporizer portable fit for dry herb, wax, powder and cream e-vaper  

This kit contains:
1*battery
1*ceramic heating chamber
1*chamber connector
1*ceramic filter+rubber mouthpiece
1*spring
1*USB+wall charger

Battery get a “lock” procedure,press the button 5 times within 2 seconds can ture on the battery ,and if you want to ture off the battery ,you  can press the button 5 times again within 2 seconds.

Overview
1.Rubber Mouthpiece
2.Ceramic Filter
3.Chamber Connector
4.Spring
5.Ceramic Heating Chamber
6.Power button
7.Rechargeable Battery

Accessories overview
1.Wall Adapter
2.USB Charger
3.Cleaning Brush Tool
4.Packing Tool

Preparing
We recommend charging the device for at least 6 hours on the first charge.This will condition the battery for future battery life span.

To load your vaporizer
1.Remove the chamber connector from the ceramic heating chamber
2.Fill the ceramic heating chamber with your herbs,use the packing tool to gently pack the chamber with your herbs.
3.Screw the chamber connector back into the ceramic heating chamber.
With yhour vaporizer connected you are now ready to vapor!

Activating
With your vaporizer ready for use,hold the power button down for two seconds to activate the hearing element.With the power button still held down,put the rubber mouthpiece in your mouth and inhale lightly.
Your vaporizer will automatically shut off after 9 seconds of continuous pressing down on the power button.wait 3 seconds before activating again.

Charging:
Charge your device for 3-4 hours,your charger will be red while charging and will turn green once the battery is full.

Several charging options
USB charger connect directly to any USB post
Wall adapter works in conjunction with the USB charger

Cleaning and Maintaining:
To clean the ceramic heating chamber
1.First disconnect from battery
2.Use the brush tool to gently clean the walls of the heating chamber.
3.Do not push all the way down and touch the heating element.

To clean the ceramic filter:
1.Use a paper clip or a pin and within the holes.
2.Push all the way through to ensure clear airway. Wipe clean with a cloth.

To clean the rubber mouthpiece
1.Use a cotton swab and wipe the inner part of the rubber mouthpiece
2.Wipe the mouthpiece with a damp paper towel.

Removing spring and filter
1.Remove the mouthpiece from the chamber connector.
2.Unscrew the chamber connector from the ceramic heating chamber.
3.Turn the chamber connector upside down and the mesh filter should fall out easily.
4.use the spoon end of the packing tool if necessary.
5.To remove the spring form the chamber connector hold the spring at the highest part possible.Twist counterclockwise chamber coinventor.

Warning:
Do not fill the heating chamber with any stems,seeds or liquid.Doing so will cause damage to the vaporizer and void the warranty.
Do not put your vaporizer in water or any other liquid.
Do not put any objects into the opening of your device.